Why Should I Choose Thermawood®?

Thermawood is the only unique, patented retrofit system. Only Thermawood creates a unique dry glazing system for double glazing into existing timber windows and doors.

The Thermawood Retrofit Double Glazing System has been tested and approved to New Zealand building standard NZS4211:2008 for weather tightness.

The Thermawood Retrofit Double Glazing System is the only system that uses a drainage adapter under the double glazing to prevent any moisture sitting around the double glazing. Any moisure sitting around the double glazing will cause the double glazing to breakdown and fail over time This breakdown becomes visable when the moisure penetrates inbetween the two panes of glass causing it to fog inside. Fog inbetween double glazing can not be fixed, the whole double glazed unit will need replaced. Using the Thermawood Retrofit Double Glazing System is reassurance you will get longevity from your double glazing no matter what the conditions.

According to the Department of Building and Housing, in a well-insulated building, windows and other glazed areas are the biggest source of heat loss. The installation of a double glazed unit effectively halves the heat loss when compared to a single-glazed window of a similar shape and size.

 Glazing is an important consideration when renovating or building. The correct glazing choice can ensure you are creating a more comfortable, sustainable environment suitable for both hot and cool weather. In some areas of New Zealand, double glazing can be used to meet the new H1 requirements.

 Insulation is becoming increasingly important in building and renovation; however heat loss due to inefficient or outdated glazing can mean that your insulation will be ineffective and less cost effective. Different types of glass are required for different environmental conditions. Our Thermawood retrofit double glazing system is designed around an already existing and highly effective double glazing solution and guarantees that a range of high tech double glazing units can be installed. The advantages of using an insulating glass unit (IGU) include:

  • Warm Edge technology. This means a high tech, innovative spacer system is used which is made from stainless steel and high performing plastic. Benefits of this technology include decreased thermal conductivity and improved insulation efficiency. Overall performance of the IGU is increased because there is a reduction in the onset of condensation towards the outer edge area of the unit.
  • Ideal for use in thermally efficient window frames. The Thermawood retrofit double glazing system maximizes the thermal properties of timber ensuring your window frames become very, very efficient.
  • Higher interior glass surface temperatures at the edge area zone.
  • Lower risk of edge area condensation forming on the glass.
  • Improved heat flow in windows due to a thermal break at the IGU edge.
  • Improved overall window U values (or R values).
  • Improved efficiency of the building.
  • Attractive design.

 The Thermawood retrofit double glazing system utilizes timber due to its associated thermal, acoustic and chemical properties.

  • Timber is a natural insulator. The air pockets within its cellular structure ensure that it is a natural barrier to heat and cold. Because thermal conductivity decreases in timber, it is a far better insulator than aluminium and this is utilized in the Thermawood retrofit double glazing system.
  • Timber has an innate ability to damp acoustic vibrations. Again, its cellular structure of tiny, interlocking pores converts sound energy into heat energy through frictional and viscous resistance within these pores and by vibration of their small fibres. This ensures that timber has a higher damping capacity than most other materials.

 Double glazing is a highly effective solution when compared to the standard 3mm or 4mm clear glass that most homes currently have. Some of the key benefits of double glazing are:

  • Increased comfort levels. When combined with insulation in the walls, ceiling and floor; double glazing your windows and doors will ensure temperatures are kept stable and heating and cooling costs are reduced.
  • Heat loss is halved with standard double glazing when compared to a single glazed window. This can be further reduced by using other glass types such as low-E glass and using argon gas to fill the space between the two panes of glass. (See our product info for more on these products.)
  • Condensation is reduced. Eliminates dew building up on windows and fights mould.
  • Reduced noise, standard double glazing can also help reduce noise levels in the medium to high frequency range (such as voices). An even greater degree of noise reduction can be achieved by choosing laminated/acoustic glass. (see our product info for more on these products).

See our product info and services for further information

Press Editorials

 

Central Otago News - March 2017

Otago Daily Times - Monday 7 July 2014

 

©2017 Thermawood Otago Ltd